High Quality Automatic Armature Winding Machine, Auto Armature Winding Machine, Auto Winding Machine Suppliers in China

Home > Products > Armature Manufacturing Machine > Armature Winding Machine > Automatic motor armature winding machine

Automatic motor armature winding machine

Basic Info

Model No.: ND-LAW-5B2

Product Description

This armature winding machine has three winding modes: single slot-single hook, single slot-double hook and double layer winding. It could do twice winding in one slot, four times winding in the two adjacent slots. It has automatic treatment for wire broken, 2 settable sequences is: winding before broken, or broken before winding.

Production parameter for 100nos armatures could be stored

Display parameter, including shift output, total output, consuming time, etc.

Automatic alarm if any abnormal condition occurs

Single action, automatic and stepping operation could be switched

Steady fixture, up and bottom protective tooling and protective wire hooking device

Loading mode: cylinder feeding armature automatically, get out finished armatures manual


Technical Parameter:


Item

Specification

Wire diameter

Magnetic hysteresis method:0.16~0.55 mm

Electric control method:0.30~0.85 mm

Armature O.D range

20~60mm

Stack diameter

3~17mm

Shaft length

20~60mm

Shaft length

Less than 300mm

Armature slot

Even slot

Turn number

0~9999

Commutator diameter

8~40mm

Winding speed

0~3000 rpm

Winding motor power

1.5KW * 2

Angle detecting speed

0~3000 rpm

Angle detecting motor power

0.75KW *1

Air supply pressure

4~6 Kg/cm2

The machine total power

4000 W

Voltage

Three phase AC380V 50/60Hz

Weight

1200Kg

Dimension

2000(L)X1300(W)X1800(H)mm






























FAQ:

1. What is the price of this machine?

A:Firstly,we need to check your armature drawing,winding diagram(including wire diameter and turn number),so that we could check whether the machine is suitable for you or not.If not,we will recommend suitable machine for you,then give you official quotation.


2. What is the production efficiency of this machine?

A.Around 1000 pcs/8 hours,it is only a rough idea,depends on the armature slots number and turn number.


3. What is the operation steps of this machine?

A. Load armature on the shuttle manually,press START button,shuttle will deliver the armature to the winding position,and automatic winding,indexing and wire cutting,after completing, the shuttle will take out the finished armature from winding position,operator unload the finished armature,one cycle is completed.


4.What is the common malfunction of this machine?

A.Sometimes,there is servo alarm displayed on the touchscreen.In this case,there will be error code displayed on the servo driver(at the backside of machine),you could identify the problem according to the error code. The most common malfunction is the encoder cable which connects the servo driver and servo motor is loose,just need remove and reinsert the encoder cable again,problem will be solved.


5.Whether the tension value can be changed for every step?

A.There are four tension value for each step can be changed in the touchscreen: Standby tension value,Index tension value,Hang(Hooking) tension value,and Winding tension value.


3


Contact us if you need more details on Automatic Armature Winding Machine. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Auto Armature Winding Machine、Auto Winding Machine. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Armature Manufacturing Machine > Armature Winding Machine